Jenway 6300 Ser Man
7
the procedures) whenever possible and wear eye protection at ALL
times.
The lamp gets very hot when in use, always allow time for it to
cool down before removal. Always wear cotton gloves when
removing a faulty lamp and replacing with a new one.
Finger marks, dust and condensation can quickly destroy sensitive
and expensive optical components, always wear cotton gloves
when the optical bench is uncovered and handle any components
by their edges only. Never touch optical surfaces. Do not remove
optical covers unless the unit is in a clean, dust and condensation
free environment.
Many of the reagents, solutions and standards used for maintenance
and calibration are corrosive or hazardous, ensure all precautions
supplied with them are followed, where there is any doubt request a
MSDS (Material Safety Data Sheet) from the supplier.
This instrument can be used for analysing a broad range of
samples, do not handle them unless you are qualified to do so.
Ensure that the instrument has been correctly decontaminated
before working on it, specifically in areas where the instrument
may have been used for clinical, biological, corrosive or
radioactive samples.
1.4
Standards & Certification
No adjustments should be made to this instrument unless the test
and measurement equipment, signal source or filters to be used
have a current calibration certificate that is traceable to national or
international standards and that it is known that this test equipment
is currently performing to the certified standards. All solutions and
reagents should be fresh and within any stated shelf life with a
certificate of analysis.
1.5
Ordering Spares
When ordering spare parts as detailed in this manual please quote
the Part Number and Description. These items should be ordered
from the original supplier of the equipment or your local Jenway
Limited Distributor.
