Jenway 6300 Ser Man
6
1.1 About This Manual
This manual covers the service, maintenance, calibration and repair
of the Jenway Ltd model 6300 Spectrophotometer. (From serial
number 5000 upwards, for lower numbers please refer to 6300
Mk1 Manual)
This manual must be used in conjunction with the Instruction
Manual for this model, as many of the routine maintenance
procedures detailed in the Instruction Manual are not repeated in
this Service Manual.
1.2 Using This Manual
This manual is only for the use of Engineers and Technicians who
have successfully completed a Jenway Ltd approved Service
Training course on the Model 6300 Spectrophotometer.
Updates to this manual will be circulated through the Jenway Ltd
TSI (Technical Service Information) systems and to other
registered users of this manual. Please complete the form at the rear
of this manual to register your copy for future updates.
In practice Section 2 - Quick Reference and Section 8 –
Maintenance, with the Diagrams in Section 9 and 10, will be most
frequently used, however it is good practice to read the complete
manual initially and review it again periodically.
To find the information required refer to the Main Index or Index
to Sections to identify the relevant Section/page number required.
1.3
Warnings & Safe Practice
Always disconnect the mains supply when any covers are removed
as there are voltages present inside the unit that pose the risk of
electric shock at levels that are hazardous to life!
Do not look directly at the light source or allow the light beam to
fall directly on the eyes, switch off or dim the lamp (as described in
