20
Hollywood Reels™ • Copyright 2008 • Jennison Entertainment Technologies • All Rights Reserved
Test Mode
Hollywood Reels features a test mode to verify that certain components are functioning correctly. This feature
can be utilized to narrowing down certain technical problems or diagnosing a defective part or component.
To enter Test Mode:
1.
Push the “
SETUP
” button for
3
seconds
a.
The machine will enter the Setup mode.
b.
Push the “
SETUP
” Button AGAIN for
1
second.
c.
The machine will enter Test mode.
2.
The different Test Mode numbers will be displayed on the LEFT STAR (T01-T04)
3.
Advance through the Mode Numbers by pushing the “
TEST
” button.
4.
The context values will be displayed on the RIGHT STAR. (NOTE: The default context value should be
displayed unless previously changed by the operator. Any new context selected by the operator will be
retained unless changed or unless the program is reset to defaults.)
5.
Push the “BONUS” buttons located between the play stations to change the context values.
a.
Press the
LEFT BONUS BUTTON
to
INCREASE
the context.
b.
Press the
RIGHT BONUS BUTTON
to
DECREASE
the context.
Test Mode
Mode Number
Function
Value #
Selection
T01
INPUT
1-40
ON/OFF
T02
OUTPUT
1-48
TEST
T03
MUSIC
1-50
TEST
T04
LIGHTS
6.
Push the “SETUP” button again to EXIT the Test Mode.
NOTICE:
DO NOT CHANGE ANY VALUES IN TEST MODE WITHOUT A COMPLETE
UNDERSTANDING OF THE TEST MODE ITSELF AND ITS VARIOUS OPTIONS.
CONTACT J.E.T. OR YOUR LOCAL DISTRIBUTOR FOR ASSITANCE WITH THIS MODE.