19
Hollywood Reels™ • Copyright 2008 • Jennison Entertainment Technologies • All Rights Reserved
Returning Program to Factory Defaults
To return all program values to the default values installed by J.E.T.:
1.
Open the front access door.
2.
Locate the mainboard attached to the top of the cabinet.
3.
Ensure that the game power is ON
4.
Push the micro “TEST” and “SERVICE” buttons at the same time.
5.
Values will be reset to the factory defaults.
NOTICE:
To return the software program to all factory defaults, please follow the following instructions. Please
note that this will delete any change you as the operator made to the software after initial installation.
NOTICE:
All game parameters will return to the default factory setting programmed by J.E.T.
