12
Hollywood Reels™ • Copyright 2008 • Jennison Entertainment Technologies • All Rights Reserved
Coin Comparator Setup
Jennison Entertainment Technologies (J.E.T.) has elected to install coin comparators into Hollywood Reels in
order to facilitate ease of installation for different operators in different operations.
1.
Open both ticket doors on the front of the cabinet
2.
Look through the camera viewfinder and locate the two latches holding the camera closed.
3.
Reach your hand up through the ticket door and release both latches.
4.
Rotate the camera back towards you and allow it to rest on its chain. NOTE: Make sure chain is securely
connected.
5.
Locate the coin comparator and remove the plastic spacer from the spring loaded assembly
6.
Replace this spacer with the coin or token from your facility.
7.
Make sure that the coin is set correctly or the unit may not accept coins
8.
Close the camera.
9.
With the unit POWERED ON, insert one of your coins into the coin comparator to test.
10.
Coin should easily be accepted and fall into the coin track.
11.
Repeat to the other side and then re-latch both cameras. Make sure that both camera are securely locked.
