Jenn-Air JES8750BA Series, Руководство по обслуживанию

Страница: 10 / 67

Troubleshooting Procedures
!
WARNING
To avoid risk of electrical shock, personal injury, or death, disconnect power to range before servicing, unless
testing requires power.
10 16026926
© 2006 Maytag Services
Troubleshooting Chart
Problem Possible Cause Correction
No bake element operation
Open bake element ..................................
Loose wire connection or broken wire ......
Open bake relay .......................................
•
Check element for continuity, replace if
failed.
•
Verify all connections are clean and
tight, replace broken wire.
•
Verify 240 VAC at bake element.
No broil element operation
Open broil element ...................................
Loose wire connection or broken wire ......
Open broil relay ........................................
•
Check element for continuity, replace if
failed.
•
Verify all connections are clean and
tight, replace broken wire.
•
Verify 240 VAC at broil element.
Oven not operating
Programming error....................................
Power outage............................................
Unit in Sabbath mode ...............................
•
Switch circuit breaker off to oven for
five minutes and try oven again.
•
Verify power is present at unit and
circuit breaker is not tripped.
•
Refer to Use & Care manual and
remove unit from Sabbath mode.
Clock and timer not working
Power outage............................................
Electronic Control locked..........................
•
Verify power is present at unit and
circuit breaker is not tripped.
•
Replace household fuse, but do not
fuse capacity.
•
Refer to Use and Care manual and
unlock electronic control.
Oven light does not operate
Failed oven lamp ......................................
Failed wiring..............................................
Failed light socket .....................................
•
Check lamp and replace is necessary.
•
Check for broken, loose or dirty
connections.
•
Check light socket for continuity.
Oven door will not unlock
Oven is self-cleaning ................................
Oven is still hot .........................................
•
Allow cycle to complete.
•
Will not unlock until unit has cooled to
safe temperature. Do not force door
open, this will void warranty. Blow cool
air on door latch to quicken process.
Oven smokes/odor first few
times of usage
Normal ......................................................
•
Minor smoking or odor is normal the
first few times of oven usage.
•
Ventilate area well and perform self-
clean cycle.
Surface element doesn’t
heat Open element ...........................................
Loose wire connection or broken wire ......
Failed infinite switch..................................
•
Check element for continuity, replace if
failed.
•
Verify all connections are clean and
tight, replace broken wiring.
•
Check infinite switch, replace if failed.
Self-clean cycle not working Programming error....................................
Door lock...................................................
•
Turn off circuit breaker for five minutes
and try oven again.
•
Verify door lock energizes & engages.
Frequent cycling of surface
element or warming zone Normal ......................................................
•
Element cycles to maintain proper heat
and to prevent damage to smoothtop.