Jema Autolifte DWC-8-E Скачать руководство пользователя страница 34 | Manualshive

Страница: 34 / 37

background image

34

CHAPTER 8 MACHINE SCRAPPING

ALL THE PRECAUTIONARY MEASURES DESCRIBED IN CHAPTER 3, APPLIED ALSO
DURING ASSEMBLY, MUST BE APPLIED DURING SCRAPPING THE MACHINE.

As in the case of assembly, disassembly must also be performed exclusively by properly trained
personnel.  Metal  parts  may  be  used  as  metal  scrap.  In  any  cases  of  scrapping,  the  machine
neutralization  of  all  the  materials  must  be  conducted  in  accordance  with  the  regulations
applicable in the country of the machine installation.
It  should  also  be  noted  that  for  taxation  purposes,  efficient  hibernation  of  the  machine  must  be
documented in reports and forms compliant with the law applicable in the country of the machine
installation.

Fire protection

This machine does not pose any fire hazard. In every case, the place in which the wheel balancer
is installed must comply with the requirements of fire protection regulations applicable in the
county of the machine installation.
It is required to keep one or more portable fire extinguishers within the operator’s reach (in the
operator zone) so that he is able to stop fire immediately upon its appearance.

Accident prevention

It is necessary to apply all precautionary measures provided for in regulations pertaining to
accident prevention applicable in the country of machine installation while lifting/lowering, moving,
installing, assembly or disassembly of the wheel balancer. Moreover, all the regulations regarding
use of forklift trucks must be applied.

«
...
32
33
34
35
36
...
»

Содержание DWC-8-E






































Отзывы:

Нет отзывов

Похожие инструкции для DWC-8-E

Бренд: Hunter Страницы: 157

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды