144
STARTING AND OPERATING
(Continued)
REFUELING THE VEHICLE
The Capless Fuel System uses a flapper placed
at the filler pipe of the fuel tank; it opens and
closes automatically upon insertion/extraction
of the fuel nozzle.
The Capless Fuel System is designed so that it
prevents the filling of an incorrect type of fuel.
Opening The Door
For filling, proceed as follows:
1. Open the door, by pushing and releasing
on the indentation point indicated by the
arrow.
Fuel Filler Door
2. Insert the fuel nozzle in the filler pipe and
proceed with filling the fuel tank.
Filler Pipe
3. Before removing the nozzle, wait at least
10 seconds to allow the fuel to flow inside of
the tank.
4. Pull the nozzle from the filler pipe and then
close the door.
WARNING!
Drivers must be careful when backing up even
when using the Rear Back Up Camera. Always
check carefully behind your vehicle, and be
sure to check for pedestrians, animals, other
vehicles, obstructions, or blind spots before
backing up. You are responsible for the safety
of your surroundings and must continue to pay
attention while backing up. Failure to do so can
result in serious injury or death.
CAUTION!
To avoid vehicle damage, Rear Back Up
Camera should only be used as a parking aid.
The Rear Back Up Camera is unable to view
every obstacle or object in your drive path.
To avoid vehicle damage, the vehicle must
be driven slowly when using the Rear Back
Up Camera to be able to stop in time when
an obstacle is seen. It is recommended that
the driver look frequently over his/her
shoulder when using the Rear Back Up
Camera.
WARNING!
Do not to affix objects/plugs to the end of
the filler neck other than what is provided
on the car.
The use of objects/plugs that are not
compatible with the vehicle may cause
pressure increases inside the tank,
creating dangerous conditions.
21_BV_OM_EN_USC_t.book Page 144