
82
GETTING TO KNOW YOUR INSTRUMENT PANEL
TRIP COMPUTER
The Trip computer is used to display information
on car operation when the key is turned to the
RUN position.
This function allows you to define two separate
trips called “Trip A” and “Trip B” where the car's
“complete trips” are monitored in an
independent manner.
Both trips can be reset (reset - start of a new
trip). To perform a reset, push and hold the OK
button on the steering wheel controls.
“Trip A” and “Trip B” are used to display the
figures relating to:
Distance Traveled
Average Consumption
Travel Time (driving time)
Quantities Displayed
Distance Traveled
Indicates the distance traveled by the start of
the new trip.
Average Consumption
Represents the average fuel consumption
since the start of the new trip.
Travel Time
Elapsed time since the start of the new trip.
OK Button
Short Push Of The Button: display of various
parameters.
Long Push Of The Button: reset quantities and
begin a new trip.
New trip
Starts after reset:
“Manual” by pushing the OK button.
“Automatic” when the “distance” reaches the
value of 62140 (99999.9 km) or when the
“time travel” reaches the value of 999.59
(999 hours and 59 minutes).
After each disconnection and reconnection
of the battery.
WARNING/INDICATOR LIGHTS AND
MESSAGES
The warning/indicator light switches on in the
instrument panel together with a dedicated
message and/or acoustic signal when
applicable. These indications are indicative and
precautionary and as such must not be
considered as exhaustive and/or alternative to
the information contained in the Owner Manual,
which you are advised to read carefully in all
cases. Always refer to the information in this
chapter in the event of a failure indication.
All active telltales will display first, if applicable.
The system check menu may appear different
based upon equipment options and current
vehicle status. Some telltales are optional and
may not appear.
The following warning lamps and indicators will
alert you to a vehicle condition that may
become serious. Some lamps will illuminate
when you start your vehicle to make sure they
work. If any lamps remain on after starting your
vehicle, refer to the respective system warning
lamp for further information.
21_BV_OM_EN_USC_t.book Page 82