386
SERVICING AND MAINTENANCE
4. Remove the bulb from the bulb socket by
pulling the bulb straight out.
5. Insert the new bulb, making sure that it is
locked into place.
6. Reinstall the socket in to the transparent
lens assembly.
7. Reinstall the cover on the outside rear view
mirror, making sure it is locked into place.
Rear Tail Lamps
Contain the following:
Position lights
Stop lights
Direction indicator
REVERSE lights
See below steps to replace:
1. Open the liftgate.
2. Using a suitable tool remove the door as
shown.
Trim Panel Door
3. Using a suitable tool remove fastener.
4. Disconnect the electrical connector by
pushing the release.
Rear Lamp Fastener and Electrical Connector
5. Remove the rear tail lamp, sliding it toward
the outside as shown.
Tail Lamp Removal
6. Unscrew the screws and remove the rear
tail lamp holder.
Rear Lamp Assembly
1 — Electrical Connector
2 — Fastener
1 — Mounting Screws
21_BV_OM_EN_USC_t.book Page 386