GETTING TO KNOW YOUR VEHICLE
25
Three attempts are made to lock the doors
using the door panel switch and then the
doors are closed.
There is a valid Passive Entry key fob outside
the vehicle and within 5 ft (1.5 m) of either
Passive Entry door handle.
To Lock The Vehicle’s Doors And Liftgate
With one of the vehicle’s Passive Entry key fobs
within 5 ft (1.5 m) of either front door handle,
push the Passive Entry lock button located on
the outside door handle to lock the vehicle
doors and liftgate.
Push The Door Handle Button To Lock
NOTE:
DO NOT grab the door handle when pushing the
door handle lock button. This could unlock the
door(s).
DO NOT Grab The Door Handle When Locking
NOTE:
After pushing the door handle button, you
must wait two seconds before you can lock or
unlock the doors, using either Passive Entry
door handle. This is done to allow you to
check if the vehicle is locked by pulling the
door handle without the vehicle unlocking.
The Passive Entry system will not operate if
the key fob battery is depleted.
To Unlock/Enter The Liftgate
The liftgate Passive Entry unlock feature is built
into the electronic liftgate release handle. With
a valid Passive Entry key fob within 5 ft (1.5 m)
of the liftgate, push the electronic liftgate
release handle to open.
Liftgate Release/Passive Entry
1 — Electronic Liftgate Release
2 — Liftgate Passive Entry Location
2
21_BV_OM_EN_USC_t.book Page 25