Jeep AVENGER 2023, Руководство пользователя

Страница: 239 / 300

237
Vehicle storage at extreme
temperatures may cause damage to the
high voltage battery.
Remove the black negative (
−
) cable
from the 12 V conventional battery
and attach a trickle charger to the
conventional battery terminals or keep
the 12 V conventional battery cables
connected and trickle charge from the
positive (+) and negative (
−
) terminals in
the engine compartment.
Every three months, check the
battery's state of charge. If the state of
charge is below 30 percent, recharge the
battery to 30 percent.
PUTTING BACK INTO
OPERATION
When the vehicle is to be put back into
operation:
Connect the clamp to the negative
terminal of the conventional battery.
Initialise the power windows.
Check tyre pressure.
Fill up the washer fluid reservoir.
Check the engine oil level.
Check the coolant level.
Fit the number plate if necessary.
PUTTING BACK INTO
OPERATION (ELECTRIC
VEHICLE)
When the vehicle is to be put back into
operation:
Connect the clamp to the negative
terminal of the conventional battery.
Initialise the power windows.
Check tyre pressure.
Fill up the washer fluid reservoir.
Check the coolant level.
Fit the number plate if necessary.
EXTERIOR CARE
145)
LOCKS
The locks are lubricated at the factory
using a high quality lock cylinder
grease. Use a de-icing agent only when
absolutely necessary, as this has a
degreasing effect and impairs lock
function. After using a de-icing agent,
have the locks regreased by a Jeep
Dealership.
WASHING
The paintwork of your vehicle is exposed
to environmental influences.
Bird droppings, dead insects, resin,
pollen and the like should be cleaned off
immediately, as they contain aggressive
constituents which can cause paint
damage.
Depending on the environment, clean
the vehicle frequently to remove salty
deposits (in coastal areas), soot (in
industrial areas) and mud/salts (in wet or
cold areas). These substances can be
highly corrosive.
Contact a Jeep Dealership for advice
on removing stubborn stains requiring
special products (such as tar or insect
removers).
Preferably, have paint touch-ups
performed by a Jeep Dealership.
If using a vehicle wash, comply with the
vehicle wash manufacturer's instructions.
The windscreen wiper and rear window
wiper must be switched off. Remove
external accessories such as roof
racks etc. Be sure to lock the doors
and, depending on version, move the
electronic key away and deactivate the
"Hands Free boot opening".
If you wash your vehicle by hand, make
sure that the insides of the wheel
housings are also thoroughly rinsed out.
Clean edges and folds on opened doors
and the bonnet as well as the areas they
cover.
Clean bright metal mouldings with
a cleaning solution approved for
aluminium to avoid damages.
Do not wash the vehicle in bright
sunshine or extremely cold conditions.
146)
The image engraved on the fuses cover
fig. 315 reminds to not clean the engine
compartment with a steam-jet or high-
pressure jet cleaner.