Jeep AVENGER 2023, Руководство пользователя

Страница: 234 / 300

SERVICING AND MAINTENANCE
232
Rear window
311
JJ000765
Lift the wiper arm only slightly until it
engages. Disengage wiper blade and
remove.
138)
Lower wiper arm carefully. Check that
the wiper arm is not blocked while
operating.
AIR CONDITIONING REGULAR
OPERATION
139) 140)
In order to ensure continuously efficient
performance, cooling must be operated
for a few minutes once a month,
irrespective of the weather and time
of year. Operation with cooling is not
possible when the outside temperature is
too low.
Depending on the environment and
the use of the vehicle (e.g. dusty
atmosphere, city driving), change it twice
as often, if necessary.
NOTE A clogged passenger compartment
filter can adversely affect air
conditioning system performance and
generate undesirable odours.
EXHAUST SYSTEM
313) 314)
141)
Adequate maintenance of the
engine exhaust system represents
the best protection against leaks of
carbon monoxide into the passenger
compartment.
WARNING
295) The air intake system (air cleaner,
rubber hoses, etc.) can be a protection in
the case of blowbacks from the engine.
DO NOT REMOVE this system unless you
need to carry out repair or maintenance.
Before starting the engine, ensure that
the system has not been removed: failure
to observe this precaution may result in
serious injury.
296)
Only perform engine compartment
checks when the ignition is off. The
cooling fan may start operating even if the
ignition is off.
297) The ignition system uses extremely
high voltage. Do not touch.
298) Take care with objects or clothing
that could be caught in the blades
of the cooling fan or in certain moving
components - risk of strangulation and
serious injury! Before carrying out any
work under the bonnet, you must switch
off the ignition, check that the
READY
indicator lamp is off on the instrument
panel and disconnect the charging nozzle
if it is plugged in.
299) Electric versions: Never try to
perform maintenance work on high
voltage components yourself. You may be
injured and the vehicle may be damaged.
Service and repair of these high voltage
components should only be performed by
a trained service technician with proper
knowledge and tools. Exposure to high
voltage may cause shock, burns, and even
death. The high voltage components
in the vehicle can only be serviced by
technicians with special training. High
voltage components are identified by
labels. Do not remove, open, take apart,
or modify these components. High voltage
cable or wiring has orange covering. Do
not probe, tamper with, cut, or modify
high voltage cable or wiring.
300) The electric powertrain uses a
voltage of 350 V. This system may be
hot both when the ignition is on and
after switching it off. Comply with the
warning messages shown on the labels,
particularly inside the charging flap.
301) High voltage system voltage is
dangerous and can cause burns or other
injuries or even fatal electric shock. Since
damage to high voltage components is
not visible, Jeep recommends that you:
never touch the components, damaged or
not, and never let your jewelry or other
metallic objects come into contact with
these components; never work on the
orange high voltage cables or on any other
high voltage component marked with the
label .