Jeep AVENGER 2023, Руководство пользователя

Страница: 204 / 300

IN CASE OF EMERGENCY
202
To prevent injury to persons, the
complete tightening of the bolts must
only be carried out when all of the car’s
wheels are on the ground, to prevent the
car falling from the jack
After having travelled for about 40 km,
stop and check that the fastening bolts
are tightened correctly
Have the tightening of the spare
wheel's bolts and its tyre pressure
checked by a Jeep Dealership. Have
the punctured tyre examined. After
inspection, the technician will advise you
on whether the tyre can be repaired or if
it must be replaced.
After refitting the repaired standard wheel
Proceed as follows:
stow the space-saver spare wheel in
the dedicated housing of the boot
place the jack and the other tools in
the dedicated area of the boot
correctly reposition the boot floor
Stowing a damaged full size wheel in the
load compartment
The spare wheel well is not designed for
other tyre sizes than the spare wheel. A
damaged full size wheel must be stowed
in the load compartment and secured
properly.
WARNING
271) A punctured tire or jack thrown
forward in a collision or hard stop, could
endanger the occupants of the vehicle.
For this reason, both the jack and the
punctured tire should always be safety
placed in the appropriate compartment in
the trunk.
272) It is extremely dangerous to attempt
to change a wheel on the side of the car
next to the driving lane: make sure that
the car is at a sufficient distance from the
road, to avoid being run over.
273) Indicate the presence of the
stationary car in accordance with current
regulations: hazard warning lights,
warning triangle, etc. Those on board
should get out of the car, especially if it is
heavily laden, and wait for the wheel to be
replaced away from the threat posed by
the traffic. On gradients or on unsurfaced
roads, chock the wheels with the wedge
provided (where provided).
274)
The vehicle's driving characteristics
will be modified with the spare tire fitted.
Avoid sudden starting or stopping, sharp
or fast turns. The total life of a space-
saver spare wheel is approximately 3,000
km, after which it must be replaced by
another wheel of the same type. Never
install a standard tire on a rim that is
designed for use with a space-saver spare
wheel. Have the tire repaired and refitted
as soon as possible. Using two or more
space-saver wheels at the same time is
forbidden. Do not grease the threads of
the fastening bolts before fitting them:
they might slip out when driving!
275) The space-saver wheel is specific to
your car: do not use it on other models,
or use the space-saver wheel of other
models on your car. The space-saver
wheel must only be used in the event of
an emergency. Never use it for more than
strictly necessary and never exceed 80
km/h (50 mph). "Warning! For temporary
use only! 80 km/h (50 mph) max!"
Replace with standard wheel as soon
as possible. Never remove or cover the
sticker on the space-saver wheel. Never
apply a wheel cap on a space-saver wheel.
The vehicle's driving characteristics
will be modified with the space-saver
wheel fitted. Avoid violent acceleration
and braking, abrupt steering and fast
cornering.
276) The jack is a tool developed and
designed only for changing a wheel, if a
tire gets punctured or damaged, on the
car with which it is supplied or on other
cars of the same model. Any other use,
e.g. to jack up other vehicle models or
different things, is strictly prohibited.
Never use it to carry out maintenance or
repairs under the vehicle or to change
summer/winter wheels and vice versa; we
advise you to contact a Jeep Dealership.
Never go under the raised vehicle: use it
only in the positions indicated. Do not
use the jack to lift loads heavier than that
indicated on the label affixed to the
jack. Never start the engine with vehicle
raised. If the vehicle is raised more than
necessary, everything can become more
unstable, with the risk of the vehicle
dropping violently. Therefore, only lift the
car just enough to access the space-saver
spare wheel (where provided).