Jeep AVENGER 2023, Руководство пользователя

Страница: 163 / 300

161
NOTE For safety reasons the alerts
cannot be muted during an incoming
call.
Obstacles (2) that are close to the
vehicle, but not within the calculated
driving path are indicated in the
instrument cluster display, but no
acoustic signal is given.
The distance to rear, front and lateral
obstacles is displayed by changing
distance lines in the instrument panel
display.
The visual indications on
Uconnect™
10.25"/10.25" NAV
screen can be
temporarily closed by pressing the
icon "X". A message indicates that the
acoustic notifications will be suspended
(where provided).
If the vehicle stops for more than 3
seconds in a forward gear, if the PRND
command is in P position, the vehicle
speed exceeds 10 km/h or if no further
obstacles are detected, no acoustic
warning signals are given and no visual
feedback is displayed in the instrument
panel display.
NOTE When starting the vehicle, the
graphic and audible aids are only
available after the touch screen has
started up.
NOTE If the boot is heavily loaded,
the vehicle may tilt, affecting distance
measurements.
Side protection (versions with 12 sensors)
211
JJ000679
This function warns the driver by display
indication on Uconnect™ 10.25"/10.25"
NAV screen in the case of obstacles
alongside the vehicle fig. 211. If the
obstacle is alongside the vehicle and
within the driving path and might lead to
a collision,
telltale flashes (where
provided) and an acoustic signal is
given, coming from the direction where
the closest obstacle is. The interval
between the sounds becomes shorter as
the vehicle gets closer to that obstacle.
The sound becomes continuous if the
obstacle approaches the red area.
Obstacles alongside the vehicle are only
considered if they have been previously
recognised by the parking sensors and
memorised by the system.
Via
Uconnect™ 10.25"/10.25" NAV the
sound volume can be regulated and it
can be temporarily muted (where the
function is provided) when an obstacle
is detected. If the sound is muted, it's
automatically unmuted during the next
manoeuvre.
The sound volume can be regulated or
muted (where the function is provided)
also via Panoramic camera settings
(where provided). See "Panoramic
camera" chapter in this section for
further information.
NOTE For safety reasons the alerts
cannot be muted during an incoming
call.
The visual indications on
Uconnect™
10.25"/10.25" NAV
screen can be
temporarily closed by pressing the
icon "X". A message indicates that the
acoustic notifications will be suspended
(where provided).
213)
Objects memorised during the
manoeuvre will only be considered
during the current ignition cycle.
NOTE When starting the vehicle, the
graphic and audible aids are only
available after the touch screen has
started up.
NOTE If the boot is heavily loaded,
the vehicle may tilt, affecting distance
measurements.
Function enabling/disabling
(for versions/markets where provided)
The system can be enabled/disabled
through the Uconnect™ 10.25"/10.25"
NAV , fig. 212. Refer to "Multimedia"