Jeep 2015 Renegade Скачать руководство пользователя страница 65 | Manualshive

Страница: 65 / 668

Jeep 2015 Renegade Скачать руководство пользователя страница 65

WARNING!

•

Never leave children alone in a vehicle, or with
access to an unlocked vehicle. Allowing children to
be in a vehicle unattended is dangerous for a
number of reasons. A child or others could be
severely injured or killed. Children should be
warned not to touch the parking brake, brake
pedal, or the gear selector. Do not leave the Key Fob
in or near the vehicle, or in a location accessible to
children, and do not leave the ignition of a vehicle
equipped with Keyless Enter- N-Go in the MAR/
RUN mode. A child could start the vehicle, operate
power windows, other controls, or move the ve-
hicle.

•

Do not leave children or animals inside parked
vehicles in hot weather. Interior heat build-up may
cause them to be severely injured or killed.

General Information

Key Fob (Keyless Enter-N-Go)

This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:

•

This device may not cause harmful interference.

•

This device must accept any interference received,
including interference that may cause undesired op-
eration.

The device is covered by:

•

US: Continental FCC ID:M3N-40821302

•

Canada: Continental IC:7812A-40821302

•

Mexico: Continental 28-4138-32XX-2-00 RLVCO2811-0673

4

GETTING TO KNOW YOUR VEHICLE

63

«
...
63
64
65
66
67
...
»

Содержание 2015 Renegade





























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов