Jeep 2015 Renegade Скачать руководство пользователя страница 130 | Manualshive

Страница: 130 / 668

Jeep 2015 Renegade Скачать руководство пользователя страница 130

Air Distribution Selection

By pushing the Mode Control buttons (Defrost/Panel/
Floor buttons), it is possible to set one of the seven
possible air distributions manually by activating one or
more mode buttons:

•

Defrost Mode – Air flow to the windshield and front
side window diffusers to defrost them. Use Defrost
mode with maximum temperature settings for best
windshield and side window defrosting.

•

Panel Mode – Air flow is distributed between the
central and side instrument panel vents.

•

Floor Mode – Air flow is directed from the front and
rear footwell diffusers.

•

Floor and Panel Modes – Air flow is distributed
between the footwell diffusers and the central and side
instrument panel vents.

•

Floor and Defrost Modes – Air flow distributed be-
tween footwell diffusers and windshield and front side
window defrosting diffusers. This distribution setting
allows the passenger compartment to be warmed
effectively and prevents the windows from misting.

•

Defrost and Panel Modes – Air flow distribution
between windshield defrosting diffusers and side and
central instrument panel vents.

•

Defrost, Panel and Floor Modes – Air flow distribution
to all the diffusers.

NOTE:

Air always flows from the side instrument panel

diffusers: it is, however, possible to interrupt the air flow
by operating the wheel located near the corresponding
vents.

In AUTO mode, the climate control system automatically
manages air distribution (LEDs on the Mode Control
buttons are off).

128

GETTING TO KNOW YOUR VEHICLE

«
...
128
129
130
131
132
...
»

Содержание 2015 Renegade





























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов