Jeep 2015 Renegade Скачать руководство пользователя страница 322 | Manualshive

Страница: 322 / 668

Jeep 2015 Renegade Скачать руководство пользователя страница 322

switch is in the STOP/OFF position. Auto Park Brake is
enabled and disabled by customer selection through the
Customer Programmable Features section of the
Uconnect® Settings.

Any single Auto Park Brake application can be bypassed
by pushing the EPB switch to the release position while
the transmission is placed in PARK (automatic transmis-
sion) or the ignition switch is turned off (manual trans-
mission).

SafeHold

SafeHold is a safety feature of the EPB system that will
engage the park brake automatically if the vehicle is left
unsecured while the ignition switch is in MAR/RUN.

For automatic transmissions, the EPB will automatically
engage if all of the following conditions are met:

•

Vehicle speed is below 1.9 mph (3 km/h).

•

There is no attempt to depress the brake pedal or
accelerator pedal.

•

The seat belt is unbuckled.

•

The driver door is open.

•

The vehicle is not in the PARK position.

For manual transmissions, the EPB will automatically
engage if all of the following conditions are met:

•

Vehicle speed is below 1.9 mph (3 km/h).

•

There is no attempt to depress the brake pedal or
accelerator pedal.

•

The clutch pedal is not pressed.

•

The seat belt is unbuckled.

•

The driver door is open.

320

STARTING AND OPERATING

«
...
320
321
322
323
324
...
»

Содержание 2015 Renegade





























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов