Jeep 2015 Renegade Скачать руководство пользователя страница 334 | Manualshive

Страница: 334 / 668

Jeep 2015 Renegade Скачать руководство пользователя страница 334

CAUTION!

•

Before moving the shift lever out of PARK, you
must turn the ignition switch from the STOP/OFF
position to the MAR/RUN position, and also press
the brake pedal. Otherwise, damage to the shift
lever could result.

•

DO NOT race the engine when shifting from
PARK or NEUTRAL into another gear range, as this
can damage the drivetrain.

The following indicators should be used to ensure that
you have engaged the transmission into the PARK posi-
tion:

•

When shifting into PARK, press the LOCK button on
the shift lever and firmly move the shift lever all the
way forward until it stops and is fully seated.

•

Look at the transmission gear position display and
verify that it indicates the PARK (P).

•

With the brake pedal released, verify that the shift
lever will not move out of PARK.

Reverse (R)

This range is for moving the vehicle backward. Shift into
REVERSE only after the vehicle has come to a complete
stop.

Neutral (N)

Use this range when the vehicle is standing for prolonged
periods with the engine running. The engine may be
started in this range. Apply the EPB and shift the
transmission into PARK if you must leave the vehicle.

WARNING!

Do not coast in NEUTRAL and never turn off the
ignition to coast down a hill. These are unsafe
practices that limit your response to changing traffic

(Continued)

332

STARTING AND OPERATING

«
...
332
333
334
335
336
...
»

Содержание 2015 Renegade





























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов