Jeep 2015 Renegade Скачать руководство пользователя страница 320 | Manualshive

Страница: 320 / 668

Jeep 2015 Renegade Скачать руководство пользователя страница 320

WARNING!

•

Never use the PARK position as a substitute for the
parking brake. Always apply the parking brake
fully when parked to guard against vehicle move-
ment and possible injury or damage.

•

When leaving the vehicle, always make sure the
keyless ignition node is in the STOP/OFF mode,
remove the Key Fob from the vehicle and lock the
vehicle.

•

Never leave children alone in a vehicle, or with
access to an unlocked vehicle. Allowing children to
be in a vehicle unattended is dangerous for a
number of reasons. A child or others could be
seriously or fatally injured. Children should be
warned not to touch the parking brake, brake pedal
or the shift lever.

(Continued)

WARNING!

(Continued)

•

Do not leave the Key Fob in or near the vehicle, or
in a location accessible to children, and do not
leave a vehicle equipped with Keyless Enter-N-
Go™ in the MAR/RUN mode. A child could oper-
ate power windows, other controls, or move the
vehicle.

•

Be sure the parking brake is fully disengaged
before driving; failure to do so can lead to brake
failure and a collision.

•

Always fully apply the parking brake when leav-
ing your vehicle, or it may roll and cause damage or
injury. Also be certain to leave the transmission in
PARK. Failure to do so may allow the vehicle to roll
and cause damage or injury.

318

STARTING AND OPERATING

«
...
318
319
320
321
322
...
»

Содержание 2015 Renegade





























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов