Jeep 2015 Renegade Скачать руководство пользователя страница 593 | Manualshive

Страница: 593 / 668

Jeep 2015 Renegade Скачать руководство пользователя страница 593

Units

After pressing the “Units” button on the touchscreen you
may select each unit of measure independently displayed
in the Electronic Vehicle Information System (EVIC) or
Driver Information Display (DID). The following select-
able units of measure are listed below:

•

US

Changes the EVIC/DID to US units of measure.

•

Metric

Changes the EVIC/DID to Metric units of measure.

•

Custom

•

Fuel Consumption

Select from: “MPG” (US), “MPG” (UK), “L/100 km”
or “km/L.”

•

Temperature

Select from: “°C,” or “°F.”

•

Pressure

Select from: “psi,” “kPa,” or “bar.”

After the desired setting has been selected, press the back
arrow or Done button on the touchscreen to return to the
previous menu.

Voice

After pressing the “Voice” button on the touchscreen the
following settings will be available:

•

Voice Response Length

When in this display, you may change the Voice Re-
sponse Length settings. To change the Voice Response
Length, press the “Voice Response Length” button on the
touchscreen and select from “Brief” or “Detailed.” Press
the back arrow button on the touchscreen to return to the
previous menu.

11

MULTIMEDIA

591

«
...
591
592
593
594
595
...
»

Содержание 2015 Renegade





























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов