Jeep 2015 Renegade Скачать руководство пользователя страница 196 | Manualshive

Страница: 196 / 668

Jeep 2015 Renegade Скачать руководство пользователя страница 196

Engine Malfunction

•

What Does It Mean

The light is an integral part of the diagnostic
system of the vehicle, called OBD II. This
system monitors the performance of the emis-
sions, engine, and automatic transmission
control systems.

The light comes on briefly (as a bulb check) when the
ignition is turned to the MAR/RUN. If the light does
not illuminate, it means that there is a failure.
In some conditions, such as the poor quality of the
fuel, the light may come on only after starting the
engine.

•

What To Do

Under these conditions, you can continue driving.
Avoid heavy efforts to the engine or high speeds. The
prolonged use of the car with the light illuminated
can cause damage to the engine.

Please contact your authorized dealer as soon as
possible.

LaneSense System

•

What Does It Mean

Electronic

Vehicle

Information

Center

(EVIC) — If Equipped
The light comes on in the following ways:

Light illuminated (white): indicates that the system is
active and both of the lane markings have been
detected (the lines of the aisle are gray in color).
Light on as flashing light (amber): indicates that the
vehicle is going to cross over the lane marking.
Light illuminated (green): indicates that both lane
markings have been detected, and the system is
“armed.” The system will provide a torque warning
in the steering wheel if an unintentional lane depar-
ture occurs.

Amber
Warning

Light

194

GETTING TO KNOW YOUR INSTRUMENT CLUSTER

«
...
194
195
196
197
198
...
»

Содержание 2015 Renegade





























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов