Jeep 2015 Renegade Скачать руководство пользователя страница 353 | Manualshive

Страница: 353 / 668

Jeep 2015 Renegade Скачать руководство пользователя страница 353

a reaction time to the driver lower than the settings

⬙

Medium

⬙

and

⬙

Far

⬙

, in the case of a potential accident,

while a more dynamic driving of the car.

The setting of the sensitivity of the system is maintained
in memory when the engine is switched off.

FCW Limited Warning

If the EVIC/DID displays “FCW Limited Functionality”
or “FCW Limited Functionality Clean Front Windshield”
momentarily, there may be a condition that limits FCW
functionality. Although the vehicle is still drivable under
normal conditions, the active braking may not be fully
available. Once the condition that limited the system
performance is no longer present, the system will return
to its full performance state. If the problem persists, see
your authorized dealer.

Service FCW Warning

If the system turns off, and the EVIC/DID displays:

•

FCW Unavailable Service Required

This indicates there is an internal system fault. Although
the vehicle is still drivable under normal conditions, have
the system checked by an authorized dealer.

“Wipe Front Radar Sensor In Front Of Vehicle” Warn-
ing

The “FCW Front Radar Sensor Temporarily Blocked”
warning will display when conditions temporarily limit
system performance. This most often occurs at times of
poor visibility, such as in snow or heavy rain. The system
may also become temporarily blinded due to obstruc-
tions, such as mud, dirt or ice. In these cases, the
EVIC/DID will display “ FCW Front Radar Sensor
Temporarily Blocked” and the system will deactivate.

7

STARTING AND OPERATING

351

«
...
351
352
353
354
355
...
»

Содержание 2015 Renegade





























































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов