background image

 

28

 

2).

 

Independent hydraulic power unit. 

 

SAFETY

 

As the pump is driven by the rotating PTO, do not forget to put the control distributors 
for hydraulic parts in neutral such as the moving floor, heavy slurry door…etc. 
 

FUNCTION

 

Avoids using the tractor’s hydraulic circuit. 
 

USE

 

- Activate the tractor’s PTO. 
- Regularly check the oil level which should be displayed on the reservoir indicator. 
- Check the temperature of the oil which should not exceed 60° (thermometer of the 
reservoir indicator).  
 
 
 

MAINTENANCE 

Empty the reservoir once a year: 
 

Mineral oil 

hydro 32 Unil 

Or equivalent 

 
 

49 litres 

 

 
 
Change the cartridge of the pressure filter and return filter once a year. 
 

REVERSER 
GEARBOX 

N° 814114           R.1/1 

OIL SAE 90 

2.22 Litres

 

 

 

 
 

3).

 

Spreader meter. 

 

SAFETY 

 

- Place the protection casing. 

 

 

FUNCTION 

Determining the total number of metres carried out by the moving floor and its 
speed.   

 

USE

 

Turn the moving floor on, the meter is automatically activated. To display the total or 
speed mode, press twice on the grey button of the meter. 

 

4).

 

Rear door for thick slurry. 

 

SAFETY 

 

Содержание EPR 23-16



































Отзывы: