31
4.
Raise the front of the spreader as high as possible to make the water drain away towards
the back.
5.
Raise the slurry door and lock it with the safety valve.
6.
Unlock the access ladder to enter the body for an internal cleaning.
7.
Cover all parts that need protection from water penetration or from cleaning products.
Periodically wash the equipment with a water hose. If a high pressure water hose is used,
do not hold it too close to the spreader; avoid directing the hose on electronic
components, the engine or electric connections, hydraulic lines and hoses, seals, filler
plug, etc.
8.
Do not use detergent or acid products.
9.
Wear sufficient protection to avoid projections and slipping: waterproof suit, gloves, non-
slip boots and protective glasses.
10.
Soak several times the parts covered in dry manure to make the cleaning easier and limit
the pressure to 120 bars without standing to close to the equipment with the hose.
11.
Clean with a strong water flow but a low pressure.
12.
If the general cleaning instructions are not followed, we do not guarantee that the paint
will hold.
13.
Grease the equipment as soon as it is dry.
