27
- When the spreading is finished:
- Put the distributor in neutral, then disengage the tractor PTO.
- Do not take a bend or turn when the tractor PTO is on.
4).
Quantity to spread per hectare.
When you know the quantity of manure K (in tonnes) that you want to spread per hectare,
proceed as follows:
1 – Determine the weight of the manure P (in tonnes) loaded in the spreader.
2 – Define the distance L (in metres) to travel, to cover one hectare (according to the width of
spreading A) example A = 2.20 m.
L = 1 hectare
= 10 000 m²
Spreading width: A
A in metres
3 – Apply the formula below to work out the distance d (in metres) to cover to empty the load
P.
Example:
P = 8 T
(known)
L = 4545 M (determinated)
(10 000 : 2,20)
K = 35 T/ha (imposed)
d = P x L
K
d
= 8 x 4545
35
= 1038 m
According to the covered distance d, adjust the speed of the moving floor or the tractor to
obtain the desired quantity per hectare K.
11.
Additional equipment information.
1).
Closed hydraulic circuit.
At the entry P (pressure) of the distributor, fit the
valve
n°824274.
With a closed circuit tractor, the valve should be closed when an element of the
distributor is not activated, and should be open as soon as one of the elements is
used.
Do not forget to close the valve when an element of the distributor is not used
anymore.
