Jeanneau SUN ODYSSEY 42 DS Скачать руководство пользователя страница 133 | Manualshive

Страница: 133 / 136

Jeanneau SUN ODYSSEY 42 DS Скачать руководство пользователя страница 133

129/132

ENGINE

The engine winterization shall be carried out by a professional. Depending on the boat location, afloat
or ashore, winterization is different.

Here are a few major tasks to carry out:

Afloat

- Drain the cooling system and fill it with antifreeze.
- Switch off the battery switches, lubricate the terminals with vaseline and check the battery voltage.
- Change the anode.
- Fill the fuel tanks to a maximum in order to avoid condensation.
- Please refe to the engine manual for anything relating to the engine.

Ashore

- Take the batteries ashore and keep them on maintenance charge.
- Drain all the cooling, exhaust, oil and fuel systems.
- Carry out the winterization operations specified by the manufacturer, keeping in mind that the

freeze hazard is more significant when the boat is ashore.

- Remove and lubricate the thru-hull fittings with valves of the cooling systems, leave them open

and check the hoses.

- Slacken the a.c. generator and pump belts.

11

WINTER STORAGE

«
...
131
132
133
134
135
...
»

Содержание SUN ODYSSEY 42 DS









































































































































Отзывы:

Нет отзывов