JDS Uniphase 4100 Скачать руководство пользователя страница 84

Страница: 84 / 182

Chapter 5

Launching a reflectometry test and displaying results

Advanced functions in OTDR Expert mode

User Manual

770000102/08

Removing the reference trace(s)

To change one reference trace into a «standard» trace, select it using the

Trace/Event

key, and in the

Advanced > Overlay

menu, click once

again on

Set curve As Reference

To change all the reference traces displayed into «standard» traces,
whatever is the active trace, go in the

Advanced > Overlay

menu and

click on

Set All As Reference

Performing an acquisition once one or several trace(s) is/are
defined

Three situations can occur once an acquisition is performed:

–

Only reference trace(s) is/are displayed: the trace acquired is added
to the reference ones.

–

Reference trace(s) and «standard» trace(s) are displayed: the refer-
ence trace(s) are «blocked», the standard ones are removed and
the new trace acquired is displayed with the reference one(s).

–

No reference trace(s) defined: all the «standard» traces are
removed and only the new trace acquired is displayed.

Using the

reference trace

function in the

explorer

A trace stored in memory can be set as reference trace before loading
one or several «standard» trace(s).

To open one or several reference trace(s):

Go on the

File Explorer

Select the trace(s) to be defined as reference

Click on

Load

and select

Reference = Yes

on the key

Click on

View Trace(s)

Load Trace + Config.

The icon

appears on the upper right hand part of the results

table.

To open «standard» traces to be added to the reference ones:

Go back to the

Explorer

Select the trace(s) to be opened in the same screen as the refer-
ence traces

Click on

Load

and select

Reference = No

on the key

Click on

View Trace(s)

Load Trace + Config.

MTS2100 4100 Module US rev08.book Page 64 Jeudi, 1. août 2013 1:43 13

Содержание 4100























































































































































































Результаты поиска

Содержание 4100

Отзывы:

JDS Uniphase 4100, Руководство пользователя, Страница: 84 / 182

Результаты поиска

Содержание 4100

Отзывы: