JDS Uniphase 4100 Скачать руководство пользователя страница 30

Страница: 30 / 182

Chapter 2

Starting up

Universal connectors and adapters

User Manual

770000102/08

Removing a

module

Unscrew the two captive fixing screws of the module completely (up
to the stop).

Remove the two slots of the module from their housing onto the
base.

Carefully remove the module out of its slot.

Universal connectors and adapters

OTDR modules may be equipped with a universal connector and adapter
selected at time of order.

Adapter types

JDSU offers 5 different adapters, all compatible with this connector,
allowing the user to switch from one adapter to another according to
which fiber type he intends to work with.
Adapter types supplied are: FC, SC, DIN, ST and LC.

Switching

adapter type

In order to switch from an adapter to another, proceed as shown.

Fig. 4

5 different types of adapters may be mounted on the
universal connector

FC Adapter (EUFCAD)

DIN Adapter (EUDINAD)

LC Adapter (EULCAD)

ST Adapter (EUSTAD)

SC Adapter (EUSCAD)

APC

Connector

MTS2100 4100 Module US rev08.book Page 10 Jeudi, 1. août 2013 1:43 13

Содержание 4100























































































































































































Результаты поиска

Содержание 4100

Отзывы:

JDS Uniphase 4100, Руководство пользователя, Страница: 30 / 182

Результаты поиска

Содержание 4100

Отзывы: