10
User manual
4- Dispenser start up & storage
4.1 Dispenser start-up
4.2 Dispenser storage
A
A
B
B
D
C
•
Place the machine on a flat horizontal surface designed to support the operational weight of the machine.
•
Connect the water inlet hose (A to A), and then open the water tap/filter (B to B). Check for leaks.
•
Connect the power cord (C to C), and insert the power plug in the wall socket (D to D), the machine will
start automatically, fill up and heat the boiler, and begin to cool the cooling compartment. Drink delivery
will be blocked until the water in the boiler has reached the correct temperature.
Take the following preparations when the dispenser will not to be used for a long period (e.g.- holidays):
•
Remove the product packs and check the expiry date, if they will soon expire they should be disposed of.
•
Store opened product packs in a refrigerator until you switch the dispenser back on again. If the expiry
date has passed, the packs should be disposed of.
•
Empty powder ingredients and clean the mixer components.
•
Clean and flush the dispenser.
•
Disconnect the power plug from the socket.
•
Close the water tap.
Note:
It may take 24 hours or more for the cooling compartment to cool down completely.
Note:
If the dispenser has been shut down for a longer period, the date and time must be reset so the
programmed cleaning cycles and eco settings are reactivated.
i
i
D
C
