16
User manual
7- Cleaning
7.4 Flushing
+B
A
A+B:
2-3
sec
3L
ENTER
Hot
liquids!
i
Note:
You can flush the dispenser at any time by using the
procedure described below.
1. Press and hold
STOP (A)
and
ENTER (B)
buttons for 2-3
seconds to enter the cleaning mode (See Fig.1).
2. The display will show
FLUSHING
, press
ENTER
to continue.
Follow the instructions on the display:
PLACE FLUSH BIN MIN 1L PRESS ENTER WHEN DONE
3. Remove the drip tray and place a 3 liter / 3 quart container
(See Fig.2) under the drink outlets, then press
ENTER
(See
Fig.3).
Follow the instructions on the display:
PRESS ENTER TO FLUSH
4. Press
ENTER
to begin flushing all the drink outlets (See
Fig.4).
CAUTION HOT LIQUIDS
will shown on the display.
When flushing is finished, replace the drip tray.
The dispenser is now ready for normal dispensing again.
Warning:
The drinks dispensed are hot! Avoid scalding! Keep hands
and other body parts away from the dispenser during the
flushing process. Never let children perform the cleaning
procedures.
Fig.1
Fig.2
Fig.3
Fig.4
