18
User manual
Fig.6
7- Cleaning
7.7 Disassembling the mixing system
4. The display will now show:
REINSTALL WJM SYSTEM,
slide the mixing tray into its original position (there will be
two audible beeps when it is installed correctly), connect
the outlet tube, and close the fluid treatment panel
(there will be two more audible beeps). The machine will
automatically continue to next step. (See fig.6)
i
Note:
There is a sensor that detects if the mixing tray is in
the correct position. It is not possible to continue the
cleaning process until the mixing tray is installed in the
correct position.
1
1
1
1
2
2
3
2
2
3
Lock
Unlock
Remove
A
If the machine is fitted with the instant coffee option the display will show:
CLEAN MIXING SYSTEM
PRESS ENTER WHEN DONE
. If the machine doesn’t have the instant option, skip this step.
To remove and clean the mixer bowl, follow the steps below:
Fig.7 - Open or remove the fluid
treatment panel, pull the outlet
tube off of the mixer bowl.
Fig.10 - Use the included tool to
remove the whipper. Place the tool
behind the whipper (1). Gently
push inward on tool handle to
release the whipper (2). Pull the
whipper straight out (3).
Fig.8 - Turn the mounting plate
level counter-clockwise to the
unlock/release position(A).
Fig.11 Rotate the mounting plate
counter-clockwise beyond the
“Remove” position until it stops
turning (1). Pull the plate straight
out (2).
Fig.9 - Remove the mixer bowl by
pulling it straight out.
Fig.12 Remove the steam trap filter
and its cover.
