91
FNS-0014-060-EN June 2019 Rev A
35. PLC Battery Replacement
When the PLC battery needs to be replaced, the following message will be displayed on the Operator
Screen:
The machine can continue to be operated, but eventually the battery will fail and the control system will
lose some functionality. Saved data, such as cycle count, service phone number and service date, could
be lost and would have to be re-entered. To prevent loss of control system functions, JBT recommends
replacing the battery as soon as possible following a low battery warning message.
Recommended replacement battery: Renata CR2450N (alternative batteries may not work)
Necessary steps:
1. Before powering down the machine, take a picture of the status screen or record the cycle
count, phone number, and machine serial number (battery removal can occasionally cause
these values to be lost, requiring them to be re-entered).
2. Disconnect power plug.
3. Using a flat head screwdriver, open the main electrical box.
NOTE:
To prevent plastic screw damage, insert screwdriver into the deeper slot of the plastic
screw, as shown in
Figure 78.
Figure 78. Opening Main Electrical Box
4. Disconnect the cable harnesses in order to remove the lid.
Refer to Figure 79.
Figure 79. Disconnect Cable Harnesses
Содержание Fresh'n Squeeze Series
