![background image](http://html1.mh-extra.com/html/jb-systems/ca-8/ca-8_operation-manual_636366003.webp)
ENGLISH
OPERATION MANUAL
JB SYSTEMS
®
1/6
CA-8
OPERATION MANUAL
Thank you for buying this JB Systems
®
product. To take full advantage of all possibilities, please read these
operating instructions very carefully.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
Wired remote control for your all your light effects*
Three control buttons for optimal control of all kinds of different light effects:
STANDBY: switch the output of each unit on/off
MODE: different working modes can be selected (audio, auto, fast, slow, …)
FUNCTION: gobo/color select, dimming, strobe, …
Always in control of your light effects, even while they are used in master/slave setup: simply connect the
CA8 controller to the master.
10m cable with 6,3mm jack connector included
*Check if your light effect is adapted for use with this CA8 controller
.
MAINTENANCE
Clean by wiping with a polished cloth slightly dipped with water. Avoid getting water inside the unit. Do not
use volatile liquids such as benzene or thinner which will damage the unit.
FUNCTIONS
1. STANDBY BUTTON:
used to switch the light output of the light
effects on/off.
2. FUNCTION BUTTON:
the available functions completely depend on
the light effect you want to control. Please check the user manual of
your light effect to see which functions are available.
3. MODE BUTTON:
the different working modes completely depend on
the light effect you want to control. Please check the user manual of
your light effect to see which working modes are available.
4. CABLE:
10m cable with 6,3mm stereo jack, just plug it in the remote
input connector of the light effect
CONNECTIONS
First of all you should check if your light effect can be used with the
CA8 remote: the light effect should have a 6,3mm JACK connector
named “Remote input”.
Now just connect the 6,3mm JACK connector (4) to the remote input on
the light effect
done!
SPECIFICATIONS
Size (box):
W/57 x H/105 x D/22 mm
Weight:
260 g
Every information is subject to change without prior notice
You can download the latest version of this user manual on our website: www.jb-systems.eu