AAA-055-00084
Jaylor Operator’s Manual
- 24 -
Twin Auger Trailer Units
CONTROLS
Weighing
The scale system on standard models includes 3 weighbars. The axle system incorporates two
weighbars while the tongue and hitch system incorporates the third weighbar. The weighbars
electronically measure the amount of ration inside of the mixing chamber.
There are various scale indicators available for use on your Jaylor. The mounting assembly for
most scale indicators is the same. When attaching the indicator to the machine, be sure that it is
securely fastened. Typically, the indicator slides down into the mounting bracket, and it is also
necessary to use a wire or plastic fastener to secure the indicator to the mounting bracket. For
more information on mounting, refer to the scale manufacturer’s manual included in this binder.
Most scale options configured in trailer applications use a single scale indicator. The scale
indicator is located on the front side of the upper machine frame. The mounting bracket arm
assembly allows the scale indicator to be turned to face every direction.
Note:
Once the desired position of the scale indicator is set, ensure that the mounting bracket
arm assembly nuts are tightened firmly to secure the bracket to the machine.
Figure 4 - 3-point Scale System
Tongue Bar and Axle System Bars.
