3
WORKSHOP MANUAL
___________________________________________________________________________
PRE-SALE SERVICE
1.
Unpack the motorcycle, free it from preservation grease, assemble the separately
delivered units and parts of accessories /control of completeness/.
2.
Check engine and frame numbers – to be conform with the documentation.
3.
Take out the accumulator – charging – forming, assemnbly.
4.
Control the oil level in the gearbox – refilling.
5.
Control all the functions of electrical accessories.
6.
Basic adjustment of the headlight /page 50 operating instructions/ and vertification of
headlight tilting.
7.
Check ignition – spacing between catcher and rotor.
8.
Adjustment of coupling.
9.
Adjustment of brakes. /idle run, dearate front, clearance of stop switch cable/
10.
Filling the machine with min. 1 liter of petrol – lubricated 1:50 and starting the
engine. (Motos without Oil-master) By motorcycles with Oil-master – filling in oil,
deaerate whole systém, filling in petrol and starting.
11.
Adjusting the idle run on warm engine, retightening of cylinderheads and exhaust
elbows.
12.
Control of bolted connections.
13.
Instructions about attendance of machine and handing over to the customer.
TECHNICAL DATA
DIMENSIONS OF MOTORCYCLE
Length
2100 +/- 30 mm
Width
780 +/- 15 mm
Height
1160 +/- 30 mm
Clearance
120 +/- 10 mm
Seat height
820+/- 15mm
Axle base
1370 +/- 25 mm
Min. turn radius
3,5 +/- 0,4 m
MASS AND LOAD
Proper mass
149 +/- 3 kg
Running mass
162 +/- 3 kg
Overall mass
342 +/- 3 kg
Payload
180 kg
Nr. of seats
2
Trailer mass
50 kg overall
Sidecar mass
172 kg overall
ENGINE
Category
two-stroke, air-cooled
Nr. of cylinders
2
Cylinder capacity
343,5 ccm
Bore
58 mm
Stroke
65 mm
Compression ratio
9,8 + 0,7 :1
- 0,3 :1
Max revs.
5750 / 1 min
Max output
17 kW–10% -5250/1 min +/- 3%
Max torque
32 Nm–6% - 4750/1 min +/- 5%
CARBURETOR
Class
Jikov 28-29 CE horizontal
Slide type
CLUTCH
Type
multiple-disc in oil bath