Javelin J320i Скачать руководство пользователя страница 44

Страница: 44 / 58

Rev. 1.1

4 What are the printer features of the new i Series

Intelligent Printing System?

- Image Data Processing: Uses a method of data processing in the printer

firmware to optimise how the image is printed. The printer is able to

process a wider range of colours resulting in greater image detail, sharper

images, and better colour control.

- Ribbon Type Detection: The printer deploys RFID technology to detect the

type of ribbon installed and interacts with the driver to ensure

optimisation for printing with the type of ribbon detected.

5 What are the ribbon features of the new i Series

Intelligent Printing System?

- New HC (High Colour) Ribbon Formulation: Prints in fuller, richer colours for

improved colour reproduction with more vibrant colour range.

- New Wider Ribbon: Covers full range of edge to edge printing for better

print quality and increased operating and density range to minimise potential for

ribbon wrinkle.

- RFID Intelligence: Factory pre-programmed ribbon type and image count

information is communicated to the printer and driver at installation.

- Image Counter: Counts and saves "number of images printed" information.

This information is used to provide "ribbon low" status to the driver.

The number of images printed is continuously updated and saved in the smart

chip on the ribbon cartridge or core, so the ribbon "knows" how many card

images have been printed. This means ribbons can be removed or exchanged,

even if not fully used, and reinstalled for use of the remaining panels.

6 What are the software/driver features of the i Series

Intelligent Printing System?

- Automatic Driver Configuration: Printer detects the i Series ribbon type and

the driver automatically configures the driver to select correct ribbon type.

- Javelin Image Profile: A software tool for Windows 98 and 2000

environments that enhances colours, minimises whitewashing, and enhances

colour contrasts.

- Ribbon Low Notification and Messaging: Alerts user when ribbon is running

low (20 card images remaining) and that a replacement ribbon will soon be

required.

- Changed Ribbon Type Notification: Notifies user and requests confirmation

when a newly installed ribbon is different than the previous ribbon used.

APPENDIX A

Quick Start

Getting

Started

Operation

Starting to

Print Cards

Cleaning

Trouble

Shooting

Technical

Specifications

General

Information

Содержание J320i



























































Результаты поиска

Содержание J320i

Отзывы:

Похожие инструкции для J320i

Бренды по названию

Популярные бренды

Javelin J320i, Руководство пользователя

Результаты поиска

Содержание J320i

Отзывы:

Похожие инструкции для J320i

Бренды по названию

Популярные бренды