7
Rev. 1.1
OPERATION
3.
Load ribbon onto the supply spindle (under print
head carriage) and empty core (with tape attached)
onto the take-up spindle. Make sure the ribbon
comes off the top of the supply spindle and feeds to
the top of the take-up spindle. Push ribbon all the
way in.
4.
Push down on the printhead lock lever until an
audible 'click' signals the locked-down position.
Please note that the ribbon automatically
synchronises whenever the printhead is
locked down. Ready status will appear.
Please note that the ribbon automatically
synchronises whenever the printhead is locked down.
SUPPLY SPINDLE
TAKE UP SPINDLE
‘CLICK’
Quick Start
Getting
Started
Operation
Starting to
Print Cards
Cleaning
Trouble
Shooting
Technical
Specifications
General
Information
