General
Information
b
Rev. 1.1
4.
Loading ribbon
First, turn on the power to the printer and raise the
printhead. Ribbon loading involves the placement of the
ribbon onto the supply and take-up spindles. As soon as
the ribbon is installed and the printhead is locked down,
the spindles will automatically rotate to take up any slack
and to synchronize the ribbon to the correct panel.
Refer to printer user’s manual chapter 2 for more
instructions
.
5.
Loading cards
First shuffle a stack of new cards to reduce any electrostatic charge.
Always handle cards by their edges.
Refer to printer user’s manual chapter 2 for more instructions.
6.
Set card thickness control lever
This item can be operated by the user to set the card
thickness and to prevent more than one card feeding into
the printer at the same time and causing a jam. Simply
move the lever to adjust correct card thickness position.
Refer to printer user’s manual chapter 2 for more
information.
7.
Starting to print cards
First connect the interface cable and install the Windows driver on your PC.
Refer to printer user’s manual chapter 3 for more instructions
.
SUPPLY SPINDLE
TAKE-UP SPINDLE
Step 1
Step 2
Step 3
Quick Start
Getting
Started
Operation
Starting to
Print Cards
Cleaning
Trouble
Shooting
Technical
Specifications
General
Information
