Page 24
paired, press and hold the pairing key of the wireless remote controller, or the remote control
function key on the panel, and the wireless connection will be disconnected. After
disconnecting, the display window of the welder will display "FAL", and the green indicator
of the wireless receiver module will remain on.
6.3.2 Wired remote controller
Press the remote control key
, and the remote control indicator will turn on; insert the
aviation plug of the wired remote controller into the aviation socket to adjust the welding
current through the remote controller.
6.3.3 Optional remote control models
Type
Name
Model
Host
receiver
module
Welding
mode
Picture
Wired
Analog torch
trigger
10K
potentiometer
Analog welding
torch
None
TIG
/
Digital torch
trigger
Digital welding
torch
None
TIG
/
Wired foot
remote
controller
FRC-01(P1S3)
None
TIG
Wired
handheld
remote
controller
HRC-01(P1S1)
None
MMA
Wireless
Wireless
handheld
remote
controller
HRC-02(P1S2)
Yes
TIG/MM
A
Wireless foot
remote
controller
FRC-02(P1S4)
Yes
TIG
