Janome TS200Q, Инструкция

Страница: 36 / 64

34
z
8VHWKHVDPHSURFHGXUHDVWKHVTXDUHEXWWRQKROH
VHZLQJ6HWWKHVWLWFKZLGWKWRPDWFKWKHWKLFNQHVVRI
the cord used.
:LWKWKHEXWWRQKROHIRRWUDLVHGKRRNWKHÀOOHUFRUGRQ
the spur at the back of the buttonhole foot. Bring the
ends toward you under the buttonhole foot, clearing
the front end.
+RRNWKHÀOOHUFRUGLQWRWKHIRUNVRQWKHIURQWRIWKH
buttonhole foot to hold them tight.
Lower the needle into the garment where the
buttonhole will start, and lower the foot.
q
6SXU
w
Forks
x
6WDUWWKHPDFKLQHDQGVHZWKHEXWWRQKROH
Each side of the buttonhole and the bartacks will be
sewn over the cord.
Remove the fabric from the machine, and cut the
sewing threads only.
e
Needle thread
r
Bobbin thread
c
3XOOWKHORRVHHQGVRIWKHÀOOHUFRUGWRWLJKWHQLW
Thread the each end of the cord through a hand-
sewing needle. Then draw the both ends to the wrong
side of the fabric and knot.
NOTE:
&XWWKHÀOOHUFRUGDWERWKHQGVLIWKHÀOOHUFRUGLV
stitched on the fabric and cannot be pulled.
z
x
c
q
w
e
r
Corded Buttonhole
q
6WLWFKSDWWHUQ 02'(
w
Thread tension dial: 1 to 4
e
Presser foot: Automatic buttonhole foot R
4
w e q