58
Troubleshooting
Condition
Cause
Reference
The needle thread
breaks
1. The needle thread is not threaded properly.
2. The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is incorrectly inserted.
5. The needle and bobbin threads are not set under the presser foot
when start sewing.
7KHWKUHDGLVHLWKHUWRRKHDY\RUWRRÀQHIRUWKHQHHGOH
Page 18
Page 11-12
Page 14
Page 14
Page 21
Page 14
The bobbin thread
breaks
1. The bobbin thread is not threaded properly in the bobbin holder.
2. Lint has collected in the bobbin holder.
3. The bobbin is damaged and does not turn smoothly.
4. The thread is wound loosely on the bobbin.
Page 17
Page 56
Change the bobbin.
Page 16
The needle breaks
1. The needle is incorrectly inserted.
2. The needle clamp screw is loose.
3. The threads were not drawn to the rear after sewing.
7KHQHHGOHLVWRRÀQHIRUWKHIDEULFEHLQJXVHG
5. An inappropriate presser foot is used.
Page 14
Page 14
Page 21
Page 14
Use the correct foot.
6NLSSHGVWLWFKHV
1. The needle is incorrectly inserted, bent or blunt.
2. The needle and/or threads are not suitable for the work being sewn.
$EOXHWLSQHHGOHLVQRWEHLQJXVHGIRUVHZLQJVWUHWFKYHU\ÀQHIDEULFV
and synthetics.
4. The needle thread is not threaded properly.
$SRRUTXDOLW\QHHGOHLVXVHG
Page 14
Page 14
Use the stretch stitch
needle.
Page 18
Change the needle.
6HDPSXFNHULQJ
1. The needle thread tension is too tight.
2. The needle thread is not threaded properly.
3. The needle is too heavy for the fabric being sewn.
4. The stitch length is too long for the fabric.
$VWDELOL]HULVQRWXVHGZKHQVHZLQJYHU\ÀQHIDEULFV
Page 11-12
Page 18
Page 14
0DNHVWLWFKVKRUWHU
Apply a stabilizer.
The fabric is not
feeding smoothly
1. The feed dog is packed with lint.
7KHVWLWFKHVDUHWRRÀQH
3. The feed dog is not raised after “drop feed” sewing.
Page 56
0DNHVWLWFKORQJHU
Page 13
Loops on the seams 1. The needle thread tension is too loose.
7KHQHHGOHLVWRRWKLFNRUWRRÀQHIRUWKHIDEULF
Page 11-12
Page 14
The machine does
not work
1. The machine is not plugged in.
2. Thread has been caught in the hook race.
3. The bobbin winder spindle is not returned to the left after bobbin
winding.
Page 5
Page 56
Page 16
Buttonhole sewing
is not sewn properly
1. The stitch density is not suitable for the fabric being sewn.
2. The interfacing has not been used for the stretch or synthetic fabric.
3. The buttonhole lever is not lowered.
Page 32
Apply an interfacing.
Page 31
The machine is
noisy
1. Thread has been caught in the hook race.
2. Lint has built up in the hook race or bobbin holder.
Page 56
Page 56
Содержание TS200Q
