Janome TS200Q, Инструкция

Страница: 44 / 64

42
v
&ORVHWKH]LSSHUDQGVSUHDGWKHIDEULFRSHQÁDWZLWK
the right side facing up.
Attach the Zigzag foot A.
$GMXVWWKHVWLWFKOHQJWKWRVWLWFKZLGWKWRGHIDXOW
value) and the thread tension dial to 1.
Baste the opened fabric and zipper tape together.
i
Basting stitch
o
Zipper tape
i
o
v
b
n
m
b
Attach the zipper foot E with the left pin.
$GMXVWWKHVWLWFKOHQJWKDQGWKHVWLWFKZLGWKWRGHIDXOW
value, and thread tension dial to “4”.
Backstitch across the end of the opening 0.7-1 cm
ßDQGWXUQWKHIDEULFGHJUHHV
!0
FPß
CAUTION:
Be sure that the needle does not strike the presser
foot or zipper teeth when the zipper foot is attached.
n
6WLWFKWKURXJKWKHJDUPHQWDQG]LSSHUWDSHJXLGLQJ
the zipper teeth along the side edge of the foot.
6WRSWKHPDFKLQHFPßEHIRUHWKHIRRWUHDFKHV
the slider on the zipper tape. Lower the needle into
the fabric, and raise the foot. Remove the basting
stitches.
!1
FPß
!2
Basting stitches
!2
!1
!0
!3
m
Open the zipper, then lower the foot and stitch the
remainder of the seam.
$IWHUVHZLQJLVÀQLVKHGUHPRYHWKHEDVWLQJVWLWFKHV
on the upper fabric.
!3
Basting stitches on upper fabric