Janome TS200Q, Инструкция

Страница: 24 / 64

22
Numbers 10 20 30 40 1/2 5/8 3/4 1 1 1/2
Distance (cm) 1.0 2.0 3.0 4.0 — — — — —
Distance (inch)
—
— — — 1/2 5/8 3/4 1 1 1/2
y
w
e
r
y
t
q
Using Seam Guides
The seam guides on the needle plate and the hook cover
plate help you to measure seam allowance.
The numbers on the needle plate indicate the distance
from the center needle position in inches and millimeters.
q
Center needle position
7KHIURQWVHDPJXLGHVDUHPDUNHGDWßßDQG
ßIURPWKHFHQWHUQHHGOHSRVLWLRQ
w
)URQWVHDPJXLGHDWß
e
)URQWVHDPJXLGHDWß
r
)URQWVHDPJXLGHDWß
The angle scales are marked at 45, 60, 90 and 120
degrees.
Use the angle scales when seaming patchwork pieces
(refer to page 45).
t
Angle scales
y
Cornering guide
Turning Square Corners
:KHQVHZLQJZLWKIDEULFHGJHDWßVHDPJXLGHWR
WXUQDVTXDUHFRUQHUVRWKDWVHZLQJFRQWLQXHVDWVDPH
distance from edge.
6WRSWKHPDFKLQHZKHQIURQWHGJHRIIDEULFUHDFKHVWKH
cornering guide lines
w
.
Lower the needle by pressing needle up/down button
q
.
Raise the presser foot and turn the fabric
counterclockwise 90°.
Lower the presser foot, and begin stitching in the new
direction.
q
Needle up/down button
w
Cornering guide
q
w