Janome TS200Q, Инструкция

Страница: 45 / 64

43
v
2SHQWKHIDEULFDIWHUVHZLQJLVÀQLVKHG
NOTE:
If the needle pierces too far left, the stitch will show
through on the right side of the fabric.
Blind Hemming
q
6WLWFKSDWWHUQ 02'(RU
w
Thread tension dial: 1 to 4 (for stitch pattern 13)
3 to 6 (for stitch pattern 14)
e
3UHVVHUIRRW %OLQGKHPIRRW*
z
Fold a hem with the wrong side of the fabric up to
IRUPDFPßDOORZDQFH
q
Wrong side of fabric
w
FPß
(1) On heavyweight fabrics that tend to ravel, the raw
HGJHVKRXOGEHRYHUFDVWÀUVW
(2) Fold the hem under the fabric for lightweight
fabrics.
x
Place the fabric so that the fold is next to the guide on
the foot.
Lower the presser foot.
$GMXVWWKHQHHGOHGURSSRVLWLRQLIQHFHVVDU\
c
6HZZKLOHJXLGLQJWKHIROGHGHGJH
e
Folded edge
r
*XLGH
Adjusting the needle drop position
$GMXVWWKHQHHGOHGURSSRVLWLRQDVIROORZV
3UHVVWKH´²µVLJQRQWKHVWLWFKZLGWKDGMXVWLQJNH\
q
to
move the needle to the right.
3UHVVWKH´µVLJQRQWKHVWLWFKZLGWKDGMXVWLQJNH\
q
to
move the needle to the left.
q
6WLWFKZLGWKDGMXVWLQJNH\
The LCD display shows the distance between the
guide and left needle drop position in millimeters.
The needle drop position can be varied from 0.0 to 1.2.
NOTE:
The needle drop position can be moved, but the stitch
width will remain the same.
z
x c
v
q
w
e
r
q
w
4
w e q
q