Janome HORIZON Memory Craft 9480 QC PROFESSIONAL, Инструкция

Страница: 55 / 164

53
Adjusting Foot Pressure Control
The presser foot pressure is automatically optimized for
each stitch pattern.
However, you can adjust the foot pressure manually by
pressing the “+” key or “–” key to suit your specific sewing
needs.
(1)
Foot Up for Pivoting
If this option is turned on, the presser foot will
automatically go up when the machine stops.
This feature is very useful when turning corners.
Press the foot-up key to turn this option on or off.
(1) Foot-up key
NOTE:
Height of the foot can be adjust in the sewing setting
mode (refer to page 144).
(1)
(2)
Number of Locking Stitches
The machine sews 5 lock stitches at the beginning and 3
lock stitches at the end.
However, you can change the number of lock stitches at
the beginning and the end with this option.
To change the number of lock stitches at the beginning,
press the “+” or “–” key in section (3).
To change the number of lock stitches at the end, press
the “+” or “–” key in section (4).
(1) Lock stitches at the beginning
(2) Lock stitches at the end
(3)
(4)
NOTE:
This option is available only for the locking stitch (U3).