Janome HORIZON Memory Craft 9480 QC PROFESSIONAL, Инструкция

Страница: 93 / 164

91
Tapering
You can taper the beginning and end of the decorative
stitch patterns to create tapered corners and points.
Press the tapering key to enter the tapering mode.
(1) Tapering key
Press the stitch reference key to show the stitch
reference chart for tapering (refer to page 20).
(2) Stitch reference key
(1)
(2)
NOTE:
• The tapering length varies depending on the stitch
pattern and its tapering shape. Make a test stitch
on an extra piece of the fabric to check the tapering
length.
• If you stop the machine while sewing and change
the stitch width, center needle position or stitch
length, the machine will start tapered sewing from
the beginning.
Tapered Stitch Sample 1
Example:
To sew tapered stitch pattern #9
Select stitch pattern #9.
Start the machine. The machine sews the start tapering
pattern and pattern body.
Sew to the required length, then press the auto-lock
button. The machine sews the end tapering pattern and
stops.
(1) Auto-lock button
(2) Required length
(3) Start tapering pattern
(4) End tapering pattern
(5)
(2)
(4)
(3)
(1)
To sew the same sized tapered pattern
When finished sewing, a confirmation message will
appear. The number shown indicates the number of the
body patterns.
(5) Number of the body patterns
Press OK and simply start the machine to sew another
tapered pattern of the same size.
To sew the same tapered pattern in a different size, press
the X key.
NOTE:
When you press the reverse button while sewing, the
machine will sew several locking stitches in place,
then stop sewing automatically. The tapering pattern
is not completed.