Janome HORIZON Memory Craft 9480 QC PROFESSIONAL Скачать руководство пользователя страница 14

Страница: 14 / 164

(3)

(2)

(1)

(4)

(5)

GETTING READY TO SEW

Connecting the Power Supply

Using Start/Stop Button
1.

First make sure the power switch is off.

Insert the machine plug of the power supply cable

into the machine socket.

Insert the power supply plug into the wall outlet, and

turn the power switch on.

(1) Power switch

(2) Machine plug

(3) Machine socket

(4) Power supply plug

(5) Wall outlet

NOTE:

• Make sure to use the power supply cable that came

with the machine.

• If you turn off the power switch, wait for 5 seconds

before turning it on again.

WARNING:

• While in operation, always keep your eyes on the

sewing area, and do not touch any moving parts

such as the thread take-up lever, handwheel or

needle.

• Always turn off the power switch and unplug the

machine from the power supply:

- when leaving the machine unattended.

- when attaching or removing parts.

- when cleaning the machine.

• Do not place anything on the foot control.

Before Using Your Sewing Machine

Before using your sewing machine for the first time,

place a scrap of fabric under the presser foot and run the

machine for a few minutes.

Wipe away any oil which may appear.

Operating Instructions:

The symbol “O” on the switch indicates the “off” position

of the switch.

For the U.S.A. and Canada only

Polarized plug (one blade wider than the other):

To reduce the risk of electric shock, this plug is intended

to fit in a polarized outlet only one way. If it does not fit

fully in the outlet, reverse the plug. If it still does not fit,

contact a qualified electrician to install the proper outlet.

Do not modify the plug in any way.

Содержание HORIZON Memory Craft 9480 QC PROFESSIONAL





































































































































































Результаты поиска

Содержание HORIZON Memory Craft 9480 QC PROFESSIONAL

Отзывы:

Бренды по названию

Популярные бренды

Janome HORIZON Memory Craft 9480 QC PROFESSIONAL, Инструкция

Результаты поиска

Содержание HORIZON Memory Craft 9480 QC PROFESSIONAL

Отзывы:

Бренды по названию

Популярные бренды