Janome HORIZON Memory Craft 9480 QC PROFESSIONAL, Инструкция

Страница: 26 / 164

24
2.
Threading the Machine
(4)
Press the needle up/down button to raise the take-up
lever to the highest position.
Press the lockout key to lockout the machine.
The presser foot will go down and the upper thread
tension disks will open.
(1) Lockout key
Pass the thread in order from 1. to 8 .
1. Hold the thread with both hands and pass the thread
into the guide slot.
(2) Guide slot
2. Be sure that the thread is pulled down under the
notch and into the space below the guide slot as
shown.
(3) Notch
1.
2.
5.
3. 4.
6.
7.
8.
1.
(2)
(3)
CAUTION:
Always make sure to press the lockout key to lockout
the machine before threading the machine.
(1)
3. 4.
(4)
(7)
(5)
(6)
3. Hold the thread with both hands and draw the thread
around the corner of the guide.
Firmly pull the thread toward you along the right
channel until the thread snaps.
(4) Corner of the guide
(5) Right channel
4. Draw the thread down along the right channel and
around the bottom of the thread guide plate. Pull the
thread up along the left channel.
(5) Right channel
(6) Thread guide plate
(7) Left channel