Jands HUB 24, Руководство по эксплуатации

Страница: 15 / 46

Dimmer Operation 9
Revision 1.0 - 7-May-02 HUB24 Series Dimmer Operating Manual
4.2.2 DMX Cross Patch (1-2)
Menu 1 DMX Settings 1-2 Cross Patch
Each of the HUB24’s dimmer outputs can be set to individually respond to any DMX
channel, from 1 to 512. This allows the outputs to be patched out of sequence.
•
Select “1-2 Cross Patch” on the menu.
•
Turn the encoder wheel to highlight a dimmer output and press SELECT.
•
Turn the encoder wheel to changed the displayed DMX channel.
•
Press OK to save the new DMX channel and exit.
•
Repeat for each dimmer output.
Note: Setting a dimmer output to ‘NC’ means that output will ignore the DMX.
4.2.3 DMX Terminate (1-3)
Menu 1 DMX Settings 1-3 DMX Terminate
The HUB24 has an internal DMX termination function. The last device in the DMX
line (ie. With its DMX Thru connector not used) should have the DMX terminate
turned on.
•
Select “1-3 DMX Terminate” on the menu
•
Turn the encoder wheel to highlight either “Terminate” or “Continue”.
•
Press OK to save the new termination setting and exit.
Note: Termination does not apply to the opto-isolated DMX outputs.
4.2.4 Loss of DMX Signal (1-4)
Menu 1 DMX Settings 1-4 Loss of Signal
If the DMX control signal is lost, there are options on how the HUB24 will respond,
but in all cases the dimmer outputs will turn off if the DMX signal is not restored
within 10 minutes.
•
Select “1-4 Loss of Signal” on the menu.
•
Turn the encoder wheel to highlight either “Hold”, “Fade to 0” or
“Fade to Snap 1”.
•
Press OK to save the new signal loss setting and exit.
4.2.5 Output Control Curve (2-1)
Menu 2 Dimmer Output 2-1 Control Curve
The HUB24 contains four control curves, which can be assigned to each dimmer
output individually. The two preset curves are Linear Power and Switched, while the
remaining two are user definable.
The linear power curve gives even fade characteristics for lamps. The switched curve
may be used for controlling devices that should not be dimmed (eg. strobes, motors,
foggers, etc).